- 611
- 7 091 129
The Crawlspace Craftsman
United States
Приєднався 23 гру 2011
Welcome to The Crawlspace Craftsman! Our channel is a mix mash of all sorts of cool stuff! Me and My Wife do review videos on Tools and CNC Machines and Build and Upcycle some amazing Furniture!! We also Do a lot of DIY Home Improvement Videos and How To's! I try my hardest to post a new video every Saturday! Please like and subscribe so you can follow and help our channel grow!!! Stay Awesome Everyone!!!
(Old Channel Name "KALINDSLIFE" Same Cool Dude)
Discord: discord.gg/9dCxPEMtXY
Email: TheCrawlspaceCraftsman@gmail.com
Link.tree: linktr.ee/TheCrawlspaceCraftsman
Website: www.Kalinds.life
(Old Channel Name "KALINDSLIFE" Same Cool Dude)
Discord: discord.gg/9dCxPEMtXY
Email: TheCrawlspaceCraftsman@gmail.com
Link.tree: linktr.ee/TheCrawlspaceCraftsman
Website: www.Kalinds.life
A Side by Side look of the Masuter 3 and Masuter 3s by FoxAlien!
Click on my affiliate link below and check out the new Foxalien Masuter 3!
www.foxalien.com/products/pre-order-cnc-router-masuter-3-with-hybrid-table-bundle-kit?sca_ref=3491064.Cgy97aKmUB
Buy your Masuter 3s here:
amzn.to/4dzjHbu
OR
Buy FoxAlien CNC 4040 XE-Pro on Amazon here:
amzn.to/4897xU8
Buy The 8040 Extension Kit on Amazon here:
amzn.to/3VTT8rF
Buy Your CNC Bits on Amazon Here:
amzn.to/3kTqjv9
Buy Your Collets on Amazon here:
amzn.to/3KWO4NC
Buy Your Calipers on Amazon Here:
amzn.to/46hRl1h
Note:
As an Amazon Associate, I earn from qualifying purchases.
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your Crawlspace Craftsman Merch Here:
crawlspacewoodworks.etsy.com?section_id=47206672
Check out this link!
linktr.ee/kalindslife
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
www.patreon.com/KalindsLife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don't forget to Follow us on.....
Email: KalindsLife@gmail.com
Instagram: @KalindsLife
Discord: discord.gg/9dCxPEMtXY
*********************************************************************
Filmed On: GoPro 9 w/ Media Mod
Edited On: iMovie
Thumbnail Image: Thumbnail Maker
Microphone: GoPro 9 Media Mod
Music: EpidemicSound.com
*********************************************************************
#foxalien #cncmachine #cnc
www.foxalien.com/products/pre-order-cnc-router-masuter-3-with-hybrid-table-bundle-kit?sca_ref=3491064.Cgy97aKmUB
Buy your Masuter 3s here:
amzn.to/4dzjHbu
OR
Buy FoxAlien CNC 4040 XE-Pro on Amazon here:
amzn.to/4897xU8
Buy The 8040 Extension Kit on Amazon here:
amzn.to/3VTT8rF
Buy Your CNC Bits on Amazon Here:
amzn.to/3kTqjv9
Buy Your Collets on Amazon here:
amzn.to/3KWO4NC
Buy Your Calipers on Amazon Here:
amzn.to/46hRl1h
Note:
As an Amazon Associate, I earn from qualifying purchases.
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your Crawlspace Craftsman Merch Here:
crawlspacewoodworks.etsy.com?section_id=47206672
Check out this link!
linktr.ee/kalindslife
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
www.patreon.com/KalindsLife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don't forget to Follow us on.....
Email: KalindsLife@gmail.com
Instagram: @KalindsLife
Discord: discord.gg/9dCxPEMtXY
*********************************************************************
Filmed On: GoPro 9 w/ Media Mod
Edited On: iMovie
Thumbnail Image: Thumbnail Maker
Microphone: GoPro 9 Media Mod
Music: EpidemicSound.com
*********************************************************************
#foxalien #cncmachine #cnc
Переглядів: 447
Відео
Can a Walmart Vacuum Keep Up with My FoxAlien XE Pro CNC Machine!?
Переглядів 20716 годин тому
Super cheapn tet effective vacuum stsyem! Make sure you Like and Subscribe and follow me on my Journey Using this massive MACHINE! Please Check out FoxAlien by using my Affiliate Link Here: www.foxalien.com?sca_ref=3491064.Cgy97aKmUB OR The CL-4x4 isn’t available on Amazon…. But this one is….⬇️ Buy FoxAlien CNC 4040 XE-Pro on Amazon here: amzn.to/4897xU8 Buy The 8040 Extension Kit on Amazon her...
From Scrap Wood to Wall Art! Making a Distressed American Flag on the Foxalien CL 4x4 CNC Machine!
Переглядів 140День тому
In this video I not only show you how I make this awesome Flag.. but I will also show you the easy way to find the center of a circle! You won't want to miss this one! Make sure you Like and Subscribe and follow me on my Journey Using this massive MACHINE! Please Check out FoxAlien by using my Affiliate Link Here: www.foxalien.com?sca_ref=3491064.Cgy97aKmUB OR The CL-4x4 isn’t available on Amaz...
FoxAlien CL-4x4 CNC Machine: Power Up & First Test Cut!
Переглядів 797Місяць тому
FoxAlien CL-4x4 CNC Machine: Power Up & First Test Cut!
Unboxing and Setting Up the MASSIVE FoxAlien CL-4x4 CNC Machine!
Переглядів 1,5 тис.Місяць тому
Unboxing and Setting Up the MASSIVE FoxAlien CL-4x4 CNC Machine!
Building a HUGE Rolling table for the FoxAlien CL-4x4 Flagship Machine!
Переглядів 287Місяць тому
Building a HUGE Rolling table for the FoxAlien CL-4x4 Flagship Machine!
Unboxing my NEW Bosch 12" Dual Bevel Gliding Miter Saw! GCM12SD
Переглядів 560Місяць тому
Unboxing my NEW Bosch 12" Dual Bevel Gliding Miter Saw! GCM12SD
Our DIY Privacy Fence is 5 Years Old! Check it out how well its lasted!
Переглядів 4882 місяці тому
Our DIY Privacy Fence is 5 Years Old! Check it out how well its lasted!
Ultimate Security Upgrade: AOSU Solar Wireless D1 Max Eliminates Solar Panel Blind Spots!
Переглядів 2442 місяці тому
Ultimate Security Upgrade: AOSU Solar Wireless D1 Max Eliminates Solar Panel Blind Spots!
I Bought a RIGID RS1000 Radial Arm Saw on Facebook Marketplace & It Still had Factory Plastic on It!
Переглядів 6682 місяці тому
I Bought a RIGID RS1000 Radial Arm Saw on Facebook Marketplace & It Still had Factory Plastic on It!
This Olmlmo Cordless Battery Operated Caulk Gun is a GAME CHANGER!
Переглядів 2433 місяці тому
This Olmlmo Cordless Battery Operated Caulk Gun is a GAME CHANGER!
My New Dust Deputy Separation Cyclone! Sawdust doesn't have a chance anymore!
Переглядів 6723 місяці тому
My New Dust Deputy Separation Cyclone! Sawdust doesn't have a chance anymore!
NymoLabs 10w Diode Laser Setup and Test Cut!
Переглядів 3194 місяці тому
NymoLabs 10w Diode Laser Setup and Test Cut!
FoxAlien XE PRO 8040 Expansion Kit: The Good, The Bad and The Ugly!
Переглядів 3,4 тис.4 місяці тому
FoxAlien XE PRO 8040 Expansion Kit: The Good, The Bad and The Ugly!
PowerTec 71420 Dado Throat Plate for Rigid R4512 Table Saw from Amazon!
Переглядів 1564 місяці тому
PowerTec 71420 Dado Throat Plate for Rigid R4512 Table Saw from Amazon!
SainSmart Genmitsu Reno 4040 Unboxing, Setup and First Look!
Переглядів 1,9 тис.5 місяців тому
SainSmart Genmitsu Reno 4040 Unboxing, Setup and First Look!
I Bought ALL the NymoLab CNC Machine Accessories AVAILABLE!!!
Переглядів 1,3 тис.5 місяців тому
I Bought ALL the NymoLab CNC Machine Accessories AVAILABLE!!!
I hooked up an Ortis Auto Vacuum Relay Switch to my Miter Saw!
Переглядів 1,3 тис.5 місяців тому
I hooked up an Ortis Auto Vacuum Relay Switch to my Miter Saw!
I bought Amazons CHEAPEST Flamethrower Torch by FEPPO!
Переглядів 1,3 тис.5 місяців тому
I bought Amazons CHEAPEST Flamethrower Torch by FEPPO!
Step-by-Step Aosu Solar Wireless D1 Camera Setup: Your Complete Guide: Seamless Top-Notch Security!
Переглядів 20 тис.6 місяців тому
Step-by-Step Aosu Solar Wireless D1 Camera Setup: Your Complete Guide: Seamless Top-Notch Security!
The FoxAlien HFS-800 CNC Desktop Duct Collection System is AMAZING!
Переглядів 1,2 тис.7 місяців тому
The FoxAlien HFS-800 CNC Desktop Duct Collection System is AMAZING!
Creating a CNC Spoil Board for the NymoLabs NBX 5040! Works on Any CNC!
Переглядів 1 тис.7 місяців тому
Creating a CNC Spoil Board for the NymoLabs NBX 5040! Works on Any CNC!
Unboxing the NEW NymoLabs NBX 5040 Desktop CNC!
Переглядів 2,1 тис.7 місяців тому
Unboxing the NEW NymoLabs NBX 5040 Desktop CNC!
DIY Laser Engraved Leather Hat Patches ft. FoxAlien 20w Diode Laser!
Переглядів 9787 місяців тому
DIY Laser Engraved Leather Hat Patches ft. FoxAlien 20w Diode Laser!
Borax Solution + Laser Engraving Experiment ft. the Creality Falcon Pro! Testing 4 DIFFERENT Woods!
Переглядів 1,5 тис.7 місяців тому
Borax Solution Laser Engraving Experiment ft. the Creality Falcon Pro! Testing 4 DIFFERENT Woods!
FoxAlien 4040 XE-Pro CNC Unboxing & Setup - Elevate Your Craftsmanship Game!
Переглядів 10 тис.8 місяців тому
FoxAlien 4040 XE-Pro CNC Unboxing & Setup - Elevate Your Craftsmanship Game!
EPIC Unboxing Adventure with the Ceality Falcon Pro 10w Laser.
Переглядів 5448 місяців тому
EPIC Unboxing Adventure with the Ceality Falcon Pro 10w Laser.
Crafting a Fish Fillet & Scaler Board with FoxAlien Masuter Pro CNC Machine!
Переглядів 5888 місяців тому
Crafting a Fish Fillet & Scaler Board with FoxAlien Masuter Pro CNC Machine!
QR Code MAGIC! Unlocking XTool D1 Pro's Secrets in a Quick Tutorial!
Переглядів 1,3 тис.9 місяців тому
QR Code MAGIC! Unlocking XTool D1 Pro's Secrets in a Quick Tutorial!
Unleash Your Creativity with DIY Christmas Gift Ideas ft. XTool D1 Pro!
Переглядів 2769 місяців тому
Unleash Your Creativity with DIY Christmas Gift Ideas ft. XTool D1 Pro!
Love the content, and I'd hate to make you lose hours of work, but temprature? Temperature.
Surely you can turn up the speed/ feed rate?
Has anyone figured out how to get it to send notifications on iPhone? Kind of defeats the purpose of a security camera if I never know if any movement detected notifications while I’m at work.
I don’t have this camera hooked up any more but I know it’s possible. It notified me of motion.
@@TheCrawlspaceCraftsman strange, I have everything enabled and I have never received a notification from both my cameras.
@@VortekXtiik have you allowed push notifications in settings?
@@TheCrawlspaceCraftsman yeah, have the notifications on in my settings and in the app.
Just had these for first time tonight. I deff got the coconut milk flavor and hint of spice. I also chopped up 2 Thai chilis I grew and some chicken and a Sunnyside up egg. You forgot the fishy umami flavor that comes from the paste. It was a coconut creamy almost buttery flavor with a fishy and spicy back end kick. I'm loving these. Going to order more for sure!
Oh you’re not wrong! The fishy umami flavor! I have two packs in my pantry! I’m gunna make one tonight! 😋
MY SETTINGS WAS CORRECT FROM THE BEGINNING, BUT THAN...ONE DAY out of nowhere. my Falcon stopped cutting. I found your video and changed Machine settings to 10 000, because somehow it became 1000. In Device settings S-value was fine. Nevertheless, my machine settings changes spindle to 1000 automatically. Every time I change it to 10000 and try to cut it doesn't work. I go back there and the value is 1000 again. Please, HELP🙏
Try changing them both 1,000. If they match….You should be back in business.
Hola, se le puede poner un spindle más robusto? O un DeWalt 611. Hello, can you put a more robust spindle? Or a DeWalt 611
Yes you can! It comes with an extra mount to do so!
I managed to get two bolts out. The top of the third is rusted, and I wasn't able to get a gripwith the nut driver. What do you suggest?
Yikes! If they’re rusted I’m not sure. That might be a problem!
If you’ve got it removed….Try to turn it upside down and spin the unit with an Allen wrench. It’s usually dead center on the very bottom. That might help clear out any jam and let the crap fall out. Hope that helps… if not… you may have to replace at that point.
Nice! Awesome zoom transitions too!
Thanks bud! Trying more Shorts lately with weekly full length videos!
Really useful to see the difference and get a quick lesson in workpiece issues for free. I'm still trying to choose my first CNC machine. Thanks.
Thank you so much! I’d love to hear what you end up going with!
CATerpillar
Yeeee!!! I just start an 11 hour Articulating Guinea Pig! Just layed down for bed and not sure if I’ll be able to sleep! LoL
@@TheCrawlspaceCraftsman love to see it
@@Parkerpower55 it failed! 😂. The filament broke 1/2 way through! I’m starting articulated Slug now! Hahahah
@@TheCrawlspaceCraftsman noooooooooo!!!!
@@Parkerpower55 yup! And it was an 11 hour print! I made it big!
While I get "level" I think the word you want to use is "plumb"
Ya…..!I’ve been called out about 400 times on that! 😂
Kia wanted to charge me $300 parts and labor for one side
Fuuuu Dat!! 😂
This looks awesome! Could you move the mill while it’s on and control via the controller? So basically manually milling via the controller?
Nope. All those settings are within the .gcode so you can’t adjust. It’s just a file reader so you don’t need to use a PC to hook up to. Great if you need multiple machines running at the same time or do not have laptop.
@@TheCrawlspaceCraftsman Got it, thanks!
but….. you can move around the gantry pre cutting to set the Z-probe and things like that so essentially you can move it around just not during a project.
i see with the extension kit they have just released for the masuter 3 it comes with open loop 23 stepper motors.Is there a marked difference between them and the closed loop motors supplied with the 3s.
NEMA23 open-loop stepper motors move based on predefined steps without feedback, so they don't know if they miss a step. Closed-loop NEMA23 motors, however, have feedback systems that monitor position, allowing them to correct missed steps, leading to more accurate and reliable operation.
Key Differences: • Feedback: Closed-loop motors use feedback to ensure accuracy, while open-loop motors do not. • Reliability: Closed-loop systems can correct errors in real-time, making them more reliable for complex tasks. • Cost: Open-loop systems are simpler and cheaper but at the cost of potential accuracy issues. • Efficiency: Closed-loop systems are generally more energy-efficient due to their ability to adjust power usage based on load.
Hope that helps some!!!
Did you get a z probe with the 3s? It’s not listed in the contents list on their website.
The z probe is included.
It does! I do a parts list check in the video. It’s a 15mm block with an Airplane adapter.
@@TheCrawlspaceCraftsmanthank you. I completely missed you mentioning it when I watched the video first time.
Thanks for sharing!! The Masuter 3S looks awesome!
Absolutely!!! Can’t wait to get the extension kit!
THERE'S A 3S ALREADY??? What's the difference from the 3?
Watch this!!! A Side by Side look of the Masuter 3 and Masuter 3s by FoxAlien! ua-cam.com/video/T-MWX2Ub8x4/v-deo.html
I dont have either of these settings in my Lightburn......
What version you running?
stillers!
Not sure what that means but thanks! ☺️
@@TheCrawlspaceCraftsman i saw the pittsburgh brand I'm a steelers fan they say stillers out in pitt im from new england though
@@steveo-x5t ahhhhh!!! Hahahaah! That makes sense now! 😂🤦🏻♂️
So crazy...I just got my Optima back for the same engine issue and decided "you know its worth fixing that trim and other little stuff now" and here you are. My 10 year old engine seized at 114K miles but they still replaced it.
That dang recall saved our butts!!! 🙏😂
Nice. So ware does one look for the right number on the laser ? To have the right settings ?
So these numbers represent a percentage of power. You can’t over clock your laser. If it’s a 10w Diode… you can’t make it a 20w diode. If these numbers don’t match, you’re only going to using a certain percentage of your available power. That’s about it. Hope that helped!
@@TheCrawlspaceCraftsman hi there. Thanks. So I have a 5W LaserStorm I checked in the device settings and the S value is 255 is the good? I don’t think I’m going to mass with it? Anyway thanks again
@@vincentlekei1969 as long as your $30 matches. If your $30=1000 then your only utilizing 25% at 100% Power
Wow, Nate Chan in chat...must be nice. When I had problems with my Masuter Pro the support was a nightmare. Some people have all the luck.
Oh No!!! What was going on? Did you get it sorted out? In another note: Nate is a great guy!
be sure to add up total amps for spindle and vac. Mine was more than the relay could handle and it would shut down during the cut. Bad thing. I ended up daisy chaining two of the relays so that the cnc would turn them on but each one had it's own power supply.
Wow!! Havnt had that happen yet! Glad you got it figured out how to work.
first rule in trouble shooting check for power!
Hahaha! 🤭🤦🏻♂️
if only you had a cnc to cut the circle!
I almost used the CL4x4…. But then I thought…. It’s only a circle! ⭕️! LoL
@@TheCrawlspaceCraftsman it’s a video about a CNC just saying
Hi. This machine uses closed loop motors. How the CNC controller/PC manage the errors generated by the motor drivers ? In case of an error the CNC controller/PC stops the machine ? Do you receive a message in the CNC controller/PC ? Could you please explain that ? Thanks in advance
Yes these are closed loop. I’d for some reasons you get an error the machine will stop and you will need to reset it manually by shutting down the CNC, move your axis and then restart the project. I hope that helped some!
@@TheCrawlspaceCraftsman Thanks a lot for your clarification. Should be very nice and helpful if you make a dedicated video on that 😀
AWESOME! Just bought a 10w laser and I was upset thinking I should have purchased a stronger one. This was a game changer as I was only using 25% of the potential power. Thanks for posting.
Absolutely! It’s a common mistake we’ve all made! Glad I can pass along the info!
The paint color is really great.
Thank you! I have my wife to blame for that! 😂
I Love it
Thank Nate!!!
You two are a TEAM - that was speedy! Looks great. 👍🏻I need that long shelf in my lil room.
Thank you Sooooo much! Shes amazing!
Great video. Air assist makes a big difference. What air assist are you using in this video? Model, pressure (psi, MPa or kPa) and airflow (l/min or gal/min)? Are you using the Fox Alien one (0.030 MPa & 30 l/min). Many thanks.
This is a fish tank air bubbler pump that produces 73 cubic inches of air per minute. It’s called the Danner Supreme AP-4. Thanks for watching!
I just bought one. Thanks for the training.
Absolutely!!! You’ll love it!
All of disney wish horns 0:09 makes no diffrerence who u are 0:26 Be our guest 0:43 Do you want to build a snowman 0:58 hi Diddle de diddle de 1:15 It's a small world 1:28 yo ho is a pirates life for me 1:41 When u wish upon a star 1:59 makes no diffrerence who u are 2:24 Star wars
Pinned!!! Thanks for watching!!!
@@TheCrawlspaceCraftsmanWHAT Thank you so much
Nice job! It’s good to finally see some CL 4x4 videos on UA-cam. You’re the only one at this point.
Thanks!!! I really appreciate that! More to come too!
when i add a file to it nothing happens
What program are you using to create Gcode with. You still have to use the controller to Home and Set your Z-probe so it knows where to start and end.
@@TheCrawlspaceCraftsman Hi, so i now subbed to carveco for the month. i was able to save the gcode. i was able to see the file in both candle and uunveral gcode sender (UGS) but how do i install a file to the off line controller?
Best good presentation
Thank you!!!
I don't know how I feel about the router powers down intermittently
So that was my fault! I had the settings wrong in my GRBL. Had it on Laser mode and in turn the Router turned on and off in between segments. 🤦🏻♂️
I just took one apart like this one. This one was locked up and I replaced it from my Mom's house. I put a shot of WD-40 on the nut and tapped it with a hammer and with the allen wrench in the bottom, where previously it wouldn't budge, it turned freely. This was hardwired so I connected a a cord and plugged it in and it worked good. My question and the reason for watching your video was to see if I needed to add any sealer when I put it back together, and I noticed that you didn't. Thanks
Glad the video helped! I didn’t need any sealer.
Question: my electric plug got wet and the washer shut off. How do I get it up again?
You might have popped GFI on the plug or outlet. Try that.
67.99 at Home Depot - just ordered one.
Good Deal!!! Thanks for watching!
THANK YOU SO MUCH, I already thought that my laser did not have enough power, I got annoyed and wasted a lot of time on slower work. Now it's much better and faster. Thanks for the video!!!👍👍👍👍👍👍
Awesome!!! Glad it helped the laser and your sanity!
It drives me nuts seeing people put the seasoning in before cooking it makes all the flavor just be in the water it literally says on the pack 1 before cooking pack 2 after cooking your noodles would be a lot more hot and tasty if you drained alot of the water out then added seasoning
THANK YOU!!! I’ve been working a support case with OptLasers testing voltages from my Shapeoko3 CNC controller to the Laser Adapter/Controller due to it only performing at about 10% for the last few weeks. This was the fix!!!! Thank you for posting this.
Let’s Gooo! Glad it helped out!
How do we activate the soap disposal?
You need to use the Black tip. It’s the only one that will spray soap.
@@TheCrawlspaceCraftsman thx
Why no just say you leveled the fence line. Basically that’s what you mean lol ok .
There’s probably a handful of things in this video I could have said differently! 🤣
Can you get extra blades for it? What are you doing? The blades don’t cut no more.
Good question! I’ve never looked into that! Let us know if you find anything out!
And if you bought the “jointing” table saw blade, thin kerf…… can this jig cut a board 80” long?
80” is quite long for this honestly. I would be lying if I said yes or no though! I’m not sure!
@@TheCrawlspaceCraftsman I hear ya….but…. That jig seems nice for shorter pieces….
I so need one of these, I have been saying I was going to make one but for $89 I mind as well buy this
I could have made one too but for the money…. Why not! And it’s pretty! LoL
Thanks bud great video straight from the hip cut to the chase .. just happened to have the exact same disposal and same kitchen set up I'm gonna go head and say we probably have the same annual salary as well .. lol
Bro I’m gunna be working until I’m 80! Hahaha. I need to save all the money I can! And these ain’t cheap! Thanks for watching!!